3.2v Lifepo4 105ah Grade A Rechargeable CATL prismatic Battery
Cells For 12v 24v Electric Car Ev Rv Solar Storage System
Features:
1. LONG WARRANTY
2. BUILT TO LAST
3. BUILT TO SAFE
4. LIGHTWEIGHT AND VERSATILE
5. SAFE AND ENVIRONMENTALLY FRIEDNLY
| Model | 3.2V LiFePO4 105Ah Battery |
| Capacity | 105Ah |
| Voltage | 3.2V |
| Max Discharge/Charging Current | 1C |
| Max Charge Voltage | 3.65v |
| Charging Temperature | 0℃-55℃ |
| Discharging Temperature | -20℃-55℃ |
| Cycle Life | ≥6000 times(1c/1c 25℃) ≥3000times(1c/1c 45℃) |
| Size | 200*130*36mm |
| Weight | 2kg |
Reminder:
DIY battery pack must get the cells balanced (same voltage ) before
assembly. Later if there happens don't know how to assembled or
wrong assembly is not accepted refund. Professionals will detected
voltage/resistance/appearance and other issues before every
shipment, we can only ensure that the single battery is good, when
arrival you can test the cells within 15 days, after that means
batteries have no problem, does not provide return nor refund. If
you found problems you can contact us for return or refund. Battery
can only be unused (the electrode intact, no welding, no wear, the
appearance good) to provide return. Any return behavior buyers need
to be responsible for shipping fee.
1).Warranty period:5 years(from the date of successful delivery),if the single battery
capacity less than 80% initial
capacity,take the test pictures or video to us,we will replace it
or give satisfied solution.
2).If any miss or damaged for the shipping. Please contact us firstly, then send us the picture or video to
check. In case of loss of cargo or the battery is damaged and can
not be used or there is a greater risk of use, we will communicate
with buyer if resend it or replace it or refund the product cost.If
buyer send back the cells to seller,buyer should pay for the
shipping cost.
3).These situations not provide return nor refund
1. After the assembly or assembly process happen any problem, such
as the protection board connected to the wrong wire burned lead to
battery damage, charger failure, the assembly error or unbalanced
assembly, etc.
2. For damage caused , such as battery bulge/welded, battery pack
without protection BMS caused by charging.
